Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Mini Countryman 2

Model: Mini Mini F60, Countryman2 - Years 2017-2023
Part: Key

In the following guide dedicated to those of you who own a second edition Mini Countryman, we will explain how you can replace the small button battery located inside the car key on your own. First, you need to have a new CR2032 model battery, then remove the emergency key from inside the cover and disassemble the cover. At this point, locate the battery door protection cap and remove it as well. Finally, all you have to do is replace the old battery with the new one and correctly reassemble the protective cover.

Posted on 22 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Mini Countryman
How to replace the battery of the Mini Countryman
Mini (2010-2016 / R60, Countryman1) Below we will see the information useful for disassembling and replacing the battery of the Mini Countryman, following these simple steps. First, ope…
How do you replace the battery of the Mini Countryman?
How do you replace the battery of the Mini Countryman?
Mini (2010-2016 / R60, Countryman1) The battery replacement of the Mini Countryman is carried out by opening the hood to gain access to the upper part of the engine compartment, immedia…
How to replace the battery of a Mini Countryman Diesel
How to replace the battery of a Mini Countryman Diesel
Mini (2010-2016 / R60, Countryman1) Before we begin, we will need to open the front hood of our Mini Countryman. So let's start by unscrewing and removing the screws that secure the bat…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos