Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the cabin heating radiator of the Mini Cooper.

Model: Mini Mini R53, R50, R52 - Years 2001-2007
Part: Heater core

In this guide, we will explore the instructions and main steps on how to install the cabin heating radiator on the Mini Cooper. First, let's get inside the cabin and start by securing the heating radiator to the two inlet and outlet pipes of the coolant; then, we tighten the metal clamp screws. At this point, we reassemble all the dashboard elements, and afterward, we top off the coolant; we start the engine and top off again if necessary, finally checking the proper functioning of the heating system.

Posted on 22 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the heating radiator on the Mini Cooper R53
How to remove the heating radiator on the Mini Cooper R53
Mini (2001-2007 / R53, R50, R52) In today's video tutorial we will see how to remove and replace the passenger compartment heating radiator on the Mini Cooper R53, second series, fol…
How to remove the heating radiator on a Mini Cooper
How to remove the heating radiator on a Mini Cooper
Mini (2007-2014 / R55, R57, R56) Let's see how to remove the heating radiator on a Mini Cooper. First of all: we remove the plastic covering the central tunnel (positioned under the …
How to replace the heating radiator of a Mini
How to replace the heating radiator of a Mini
Mini (2001-2007 / R53, R50, R52) Do you want to replace the heating radiator of a Mini? First of all: we remove the plastic covering the central tunnel (positioned under the left cen…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos