Do it yourself
| ||||
|
Mini - Video tutorial
Model: Mini Mini
F57, F56, F55
- Years 2014-2023 Using a plastic wedge lever, disassemble the area of the window lifter pushbutton panel and unscrew the three torx t20 placed under it. To fully extract the push-button panel, disconnect its connector. At this point, lever again with the plastic lever all around the panel by lifting it a small part at a time and thus extracting it from the door. VoilÃ! Already done! If you want, you can easily detach the molding above the panel, the one at the base of the window. As you can see, removing the panel on this model car is much easier and faster than it usually is, when you have to unscrew a lot of bolts under and on the side of the panel.
Posted on 6 January 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the error of the VSC warning light and the ABS of the Toyota Rav4Let's see in this guide how to reset the error of the VSC warning light or the ABS of the Toyota Rav4, analyzing the possible causes. In fact, usually the VSC warning light appears almost always simultaneously with that of the ABS; it indicates a fault in the braking system, in particular in the brake pedal switch located behind the pedal, as shown in the video. Then we get on board the car, on the driver's side, and start by unhooking and removing our switch, disconnecting the electrical connector; then let's reassemble everything, checking that the errors have been cleared from the instrument panel! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.065
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |