|
Do it yourself
| |||
| ||||
How to reset the tire pressure warning light in the Mini Countryman?
Model: Mini Mini
R60, Countryman1
- Years 2010-2016
In the event of a puncture or loss of pressure in one or more tires, with subsequent restoration, the warning light must be reset manually in the Mini Countryman. To do this, start the engine and press the BC key to scroll through the display menu to the SET / INFO item. We hold down the BC key to confirm. In the new menu, press the BC button again to navigate to the RESET item and keep the BC button pressed once again until the selector moves to RESETTING. At this point, we will have to drive the car for a few minutes and the system will monitor the pressures, proceeding automatically to reset.
Posted on 16 April 2022 by ScegliAuto
Video tutorial
Related tutorials
Mini
(2007-2014 /
R55, R57, R56)
In today's video we will see the instructions that will allow us to reset the tire pressure warning light of a Mini Cooper R50-R53; before carrying o…
Mini
(2010-2016 /
R60, Countryman1)
After restoring the correct pressure of one or more tires, for example in the event of a puncture, the relative warning light must be manually reset …
Mini
(2010-2016 /
R60, Countryman1)
In order to reset the tire pressure warning light on the Mini Countryman, you need to inflate all the tires that are at an insufficient inflation pre…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.105
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
