Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor of the 2015 Mini Countryman

Model: Mini Mini R60, Countryman1 - Years 2010-2016
Part:

If the orange tire pressure warning light on the instrument panel of your 2015 Mini Countryman continues to stay on, it means that the control unit has detected an abnormal pressure in the tire indicated by the light itself. If you want to permanently turn off the light, you must inflate the tire to the correct pressure, which you can find in the car's manual. Once inflated, start your Mini Countryman and drive a few kilometers at low speed to allow the sensor to update the tire pressure and therefore turn off the warning light.

Posted on 30 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Mini Countryman
How to reset the tire pressure warning light on the Mini Countryman
Mini (2010-2016 / R60, Countryman1) The activation of the TPMS light indicates a possible puncture or pressure loss from one or more tires; in this guide we will see how to reset the ti…
How do I reset the tire pressure warning light on the Mini Countryman?
How do I reset the tire pressure warning light on the Mini Countryman?
Mini (2010-2016 / R60, Countryman1) In order to reset the tire pressure warning light on the Mini Countryman, you need to inflate all the tires that are at an insufficient inflation pre…
How to reset the tire warning light in the Mini Countryman?
How to reset the tire warning light in the Mini Countryman?
Mini (2010-2016 / R60, Countryman1) In this tutorial, we will see how to reset the tire warning light in the Mini Countryman, a very simple and quick operation that should only be done …

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos