Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the Mini Cooper

Model: Mini Mini F55, F56, F57, F54 - Years 2014-2023
Part: Service warning light

Manually resetting the engine oil light on your Mini Cooper is very simple and thanks to the procedure described in the following guide, you will have no difficulties. First of all, reach the driver's seat inside the cabin and start the dashboard in diagnostic mode by pressing the ignition button twice in a row. Once you have done this, hold down the "Trip" button located inside the tachometer and release it as soon as the new screen appears on the display. Finally, hold down the same button again until the reset is complete.

Posted on 5 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Mini Cooper
How to reset the oil light on the Mini Cooper
Mini (2017-2023 / F60, Countryman2) To manually reset the engine oil light of your Mini Cooper, you must follow these steps. First, go inside the car and sit in the driver's seat, then …
How to reset the oil light on the 2019 Mini Cooper
How to reset the oil light on the 2019 Mini Cooper
Mini (2014-2023 / F55, F56, F57, F54) In this new guide of ours, we will discover the steps to follow if you intend to manually reset the engine oil light on the instrument panel of your …
Where is the battery located and how to replace it in a Mini Cooper?
Where is the battery located and how to replace it in a Mini Cooper?
Mini (2001-2007 / R53, R50, R52) The battery of our Mini Cooper is located inside the engine compartment. To perform the replacement, we start by opening the front hood. Once the hoo…

Other guides you may be interested in

How to Remove the Spark Plugs on a Subaru Forester

In this video, learn how to remove the spark plugs on a Subaru Forester. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Remove the soundproofing panel covering the cylinder head, the air filter kit (if necessary), then disconnect the coils by hand, unscrew the spark plugs with your socket wrench, and pull them out of the cylinder head. Take the new spark plugs and guide them with the extension of the socket wrench into the cylinder head, tighten them properly, secure the ignition coils, refit the previously removed panel and the air filter kit. Close the engine bonnet.

Watch the video!


by ScegliAuto

More videos