|
Do it yourself
| |||
| ||||
Check Fluid Levels on the Mini One
Model: Mini Mini
F55, F54, F56, F57
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
In this video, learn how to check the fluid levels on the Mini One: start by opening the bonnet. The oil level is monitored electronically, so start the engine and let it idle. After about a minute, the level check will be performed. If oil needs to be added, turn off the engine, then check the level again. The coolant expansion tank is located on the right side of the engine bay. With the engine cold, turn the cap counterclockwise. The level should reach the maximum mark. If necessary, add a mixture of water and antifreeze, then securely refit the cap. The brake fluid reservoir is located at the rear of the engine bay, and the plastic cover must be removed. Again, the fluid should be at the maximum level. If needed, add new fluid from a sealed container, securely refit the cap, and then cover with the plastic lid. The windscreen washer reservoir is on the right side of the engine bay: open the cap and refill with a mixture of water and appropriate fluid, then securely refit the cap, and finally close the bonnet.
Updated on 6 October 2026 by ScegliAuto
Related tutorials
Mini
(2014-2023 /
F55, F54, F56, F57)
In the video provided, you can see how to check the engine oil level in a Mini Cooper. The procedure is identical for any other car on the market, an…
Mini
(2007-2014 /
R57, R56, R55)
How to maintain your Mini. This video explains how to check the engine oil level easily. Open the car door and pull up the lever to open the engine c…
Mini
(2023-2026 /
F66)
Let's see how to monitor the maintenance status of our Mini from the on-board computer: from the multimedia screen we select "vehicle info" and then …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.054
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |