Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Mitsubishi Outlander

Model: Mitsubishi Outlander MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

The main steps today will show you how to open and close the bonnet of the Mitsubishi Outlander, following the instructions below. First, open the front door of the vehicle and start pulling the bonnet release lever located at the bottom, near the pedals; then move to the front of the vehicle and unclip the bonnet lock pin to lift it, as shown in the video.

At this point, lower the bonnet again to close it, applying some pressure to ensure it closes properly!


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet of the Mitsubishi Outlander
How to Open the Bonnet of the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) .. The steps in this guide will show you how to open the bonnet of the Mitsubishi Outlander, as well as the ASX. First, open the driver's side.. …
How to Replace the Engine Air Filter on a Mitsubishi Outlander 2
How to Replace the Engine Air Filter on a Mitsubishi Outlander 2
Mitsubishi Outlander (2007-2012 / MK 2) If you own a Mitsubishi Outlander Mk2 and need guidance on correctly replacing the engine air filter, you are in the right place. Simply read the ins…
How to replace the fuel filter on a Mitsubishi Outlander?
How to replace the fuel filter on a Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) To replace the fuel filter on a Mitsubishi Outlander, first open the bonnet to access the components inside the engine bay: the filter is located at …

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos