Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel filter on a Mitsubishi Outlander?

Model: Mitsubishi Outlander MK 3 - Years 2013-2021
Part: Diesel fuel filter

To replace the fuel filter on a Mitsubishi Outlander, first open the bonnet to access the components inside the engine bay: the filter is located at the rear right, just below the windscreen. To reach it, you will need to remove the air filter box: once this is removed, you can locate the fuel filter, which can be disconnected and freed from the securing screws. This will allow you to install a new filter, securing and connecting it properly to the relevant pipes.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter of the Mitsubishi Outlander 2 - ASX
Replacing the Diesel Filter of the Mitsubishi Outlander 2 - ASX
Mitsubishi Outlander (2007-2012 / MK 2) This guide outlines the procedure needed to remove and replace the fuel filter located inside the fuel pump of the Mitsubishi Outlander 2, as well as…
How to replace the engine air filter of the Mitsubishi Outlander 2
How to replace the engine air filter of the Mitsubishi Outlander 2
Mitsubishi Outlander (2007-2012 / MK 2) If you own a Mitsubishi Outlander Mk2 and need a guide to correctly replace the engine air filter, then you are in the right place. All you have to d…
How to open the fuel door in the Mitsubishi Outlander?
How to open the fuel door in the Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) In this tutorial, we can see how to open the fuel door in the Mitsubishi Outlander, a very simple operation that is not different from the typical pr…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos