Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Motor

Model: Mitsubishi Outlander MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Blower motor

See other generations:
Video tutorial

To carry out this operation, you will need to remove the glove compartment door located in front of the front passenger seat. This will give you access to both the air recirculation filter and the motor.

To reach the motor, remove the lower panel, allowing you to unscrew the bolts securing the motor in question, and then disconnect the plug that powers it. Perform the necessary work to restore the air circuit in your cabin, retrace the steps in reverse, and you're done!


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan on a Mitsubishi Outlander?
How to Replace the Cabin Fan on a Mitsubishi Outlander?
Mitsubishi Outlander (2007-2012 / MK 2) To replace the heating fan on the Mitsubishi Outlander, open the glove compartment on the passenger side and remove the two side clips so that the co…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Mitsubishi Outlander (2007-2012 / MK 2) The cabin air filter is located on the passenger side, just behind the glove compartment: open the glove compartment door and push in the side latch …
Replacing Air Filter on Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Replace the cabin air filter on a Mitsubishi Outlander if you have covered a considerable distance. Open the car door, pull up the engine compartment…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos