|
Do it yourself
| |||
| ||||
Diagnosing and Resolving Electrical Issues on the Mitsubishi Fuso
Model: Mitsubishi Canter
MK 8
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
The video discusses current leakage to the chassis of a Mitsubishi Fuso (or Canter) FG 2013. This is a typical current drain issue. It means the battery discharges when the truck is stationary because a circuit remains powered or shorted to ground. Check for corrosion or frayed wiring that may touch the metal chassis. A faulty BCK/ECM module may also be the cause; it can happen that the control unit does not fully 'sleep' and continues to draw current; test by disconnecting it to see if the drain disappears. Often, the issue is with the backlighting of the dashboard or radio, which may stay on after the vehicle is turned off; or a relay or switch that remains closed, draining the battery. It could also be due to an auxiliary power socket that does not turn off. A thorough but effective method is to keep the multimeter connected and remove the fuses one by one; when the current drops to zero, you have found the faulty circuit.
Posted on 29 May 2026 by ScegliAuto
Related tutorials
Mitsubishi Canter
(2010-2024 /
MK 8)
To reset the service light on the Mitsubishi Fuso/Canter, turn on the ignition and simultaneously press the two buttons located on either side of the…
Mitsubishi Canter
(2010-2024 /
MK 8)
Let's see how to initiate the regeneration of the DPF on the Mitsubishi Fuso/Canter. If the amber DPF warning light is flashing on the dashboard, it …
Mitsubishi Canter
(2010-2024 /
MK 8)
In this video we can see the position of the fuse boxes of the Mitsubishi Fuso Canter: usually - it may vary depending on the versions - the dashboar…
Other guides you may be interested in
|
How to open the bonnet on a Volkswagen Golf?
In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
