Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of Engine Spark Plugs

Model: Mitsubishi Lancer MK 8 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Spark plugs

See other generations:
Video tutorial

This video shows how to remove and replace the spark plugs in your car's engine. First, disconnect the leads that supply power to the coils; then unscrew the support nuts of the coils and start removing the leads from the four spark plugs.

Once the leads are removed, obtain a spark plug socket of the appropriate size and length and begin unscrewing and removing the engine spark plugs. Once the old plugs are unscrewed and removed, you can proceed to install the new plugs; for a more accurate installation, it is recommended to use a torque wrench.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Spark Plug Replacement Instructions
Spark Plug Replacement Instructions
Mitsubishi Lancer (2007-2020 / MK 9) It is recommended to perform this maintenance with the engine cold to avoid unpleasant burns. Remove the plastic cover above the engine, unscrew the …
Replacement of Rear Headlamp Bulb
Replacement of Rear Headlamp Bulb
Mitsubishi Lancer (2007-2020 / MK 9) To replace the rear headlamp bulb, it is not necessary to remove the headlamp itself, but this operation does require the removal of the sound-absorb…
Repairing the Air Conditioning Controls
Repairing the Air Conditioning Controls
Mitsubishi Lancer (2000-2006 / MK 8) In this video, the air conditioning control of a Mitsubishi Lancer does not rotate properly and appears to be stuck. Looking inside the mechanism, th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos