Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Mitsubishi Lancer

Model: Mitsubishi Lancer MK 9 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, you will see how to reset the oil change light on a Mitsubishi Lancer. The first step is to perform vehicle maintenance, such as changing the engine oil and filters.

After completing the DIY service, get in the vehicle, close all doors, insert the key, and turn on the ignition without starting the engine. You will see the service message with the spanner icon on the display.

Press the INFO button on the left side of the dashboard until you find the spanner icon on the display. Hold down the INFO button until the display flashes, then press the INFO button again.

Reset completed.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to reset the maintenance (service) warning on the Mitsubishi Lancer.
How to reset the maintenance (service) warning on the Mitsubishi Lancer.
Mitsubishi Lancer (2007-2020 / MK 9) Below we will see the instructions that will allow us to reset the maintenance warning (service) of the Mitsubishi Lancer. First, let's get inside th…
How to Reset the Service Light on a Mitsubishi Lancer
How to Reset the Service Light on a Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) If you own a Mitsubishi Lancer (2007-2014) and want to learn how to correctly perform a manual reset of the service light, simply read the following …
Mitsubishi Lancer X 2008
Mitsubishi Lancer Fitting tuning eyelids on front headlights. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos