Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Transmission Oil of the Peugeot iOn - Mitsubishi i-MiEV - Citroen C-Zero

Model: Mitsubishi I Miev MK 1 - Years 2009-2021
Part: Transmission fluid

Follow the procedure to drain and replace the transmission oil of the Peugeot iOn, Mitsubishi i-MiEV, and Citroen C-Zero. First, raise the vehicle and locate the transmission next to the battery pack. Then, unscrew the oil drain bolt and allow it to drain into a container for about ten minutes. Next, unscrew the filler cap and top up with the correct new transmission fluid (as indicated in the owner's manual), adding approximately one litre.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Mitsubishi i-MiEV, a wonderful electric city car
Mitsubishi i-MiEV, a wonderful electric city car
Mitsubishi I Miev (2009-2021 / MK 1) .. is the same as the Peugeot iOn and Citroën C-Zero. This car demonstrates that for annual distances of about 1,800 to 3,700 miles (which corresponds .. …
How to Remove the Battery Pack from the Mitsubishi I-Miev
How to Remove the Battery Pack from the Mitsubishi I-Miev
Mitsubishi I Miev (2009-2021 / MK 1) .. to remove and replace the battery pack of the Mitsubishi I-Miev. First, lift the vehicle and start unscrewing all the fixing screws of the battery.. …
How to Remove the Front Headlamp of the Mitsubishi i-MiEV
How to Remove the Front Headlamp of the Mitsubishi i-MiEV
Mitsubishi I Miev (2009-2021 / MK 1) .. To remove the front headlamp of the Mitsubishi i-MiEV, open the bonnet to access the screws securing the headlamp in its housing. Disconnect.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos