Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Centre Display in a Mitsubishi Colt?

Model: Mitsubishi Colt MK 1, Z30 - Years 2004-2012
Part: Checks and maintenance

In this tutorial, you will see how to replace the centre display in a Mitsubishi Colt, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by prying in the indicated slot to disengage the air vent panel, then disconnect the connector and, using a Torx T20 spanner, remove the two screws securing the frame. Once done, remove the additional screws indicated, grasp the display, and pull it out of the housing. At this point, you can follow the reverse procedure to fit the replacement.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on the Mitsubishi Colt
How to Set the Time on the Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) In this guide for Mitsubishi Colt owners, we will describe the various steps necessary for you to independently modify the time displayed on the car'…
How to Reset the Service in the Mitsubishi Colt?
How to Reset the Service in the Mitsubishi Colt?
Mitsubishi Colt (2004-2012 / MK 1, Z30) As shown in this tutorial, resetting the service in the Mitsubishi Colt is a very simple and quick operation. Before proceeding, ensure all scheduled…
Where is the fuse box located in the 2009 Mitsubishi Colt?
Where is the fuse box located in the 2009 Mitsubishi Colt?
Mitsubishi Colt (2004-2012 / MK 1, Z30) Knowing the exact location of the fuse box in your 2009 Mitsubishi Colt is very important as it allows you to address various fuses in a targeted, sa…

    Frequently Asked Questions

    • Colt 2004-2012 - What to do in case of problems with the display of the Mitsubishi Colt? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos