Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Interval Light on the Mitsubishi Lancer

Model: Mitsubishi Lancer MK 9 - Years 2007-2020
Part: Warning light – error code

In this guide, you will learn how to reset the maintenance interval light for the Mitsubishi Lancer. To carry out this procedure, follow these steps: 1. Activate the instrument cluster and the multifunction display, but do not start the engine; 2. Use the INFO button to navigate to the maintenance section, identifiable by the wrench icon; 3. Confirm your selection by holding the INFO button for a couple of seconds until the display starts to flash; 4. When the CLEAR message appears on the display, confirm by pressing the INFO button once; 5. Restart the instrument cluster and start the engine to verify that the procedure was successful.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Mitsubishi Lancer?
How do you reset the Service light on the Mitsubishi Lancer?
Mitsubishi Lancer (2007-2020 / MK 9) In order to reset the Service light of the Mitsubishi Lancer, you need to insert the ignition key into the corresponding slot and then turn on the ig…
How to Reset the Maintenance Light on a Mitsubishi Lancer
How to Reset the Maintenance Light on a Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) In this guide for all Mitsubishi Lancer owners (2008-2014), discover how to correctly perform the manual reset of the maintenance light that continue…
Mitsubishi Lancer X 2008
Mitsubishi Lancer Fitting tuning eyelids on front headlights. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos