Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Rear Light Bulb on a Mitsubishi Colt

Model: Mitsubishi Colt MK 1, Z30 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light bulb

See other generations:
Video tutorial

If you have noticed that there is a blown bulb in the rear light of your car, the following description provides instructions on how to proceed, along with a video. First, open the rear hatch and unscrew the two screws located inside the light assembly.

Then, pull the light out towards you and disconnect the electrical connector. Next, unscrew the bulb holder and remove the blown bulb, replacing it with a new one. Finally, reassemble all components in reverse order.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Replacement of the rear headlight bulbs of the Mitsubishi Colt.
Replacement of the rear headlight bulbs of the Mitsubishi Colt.
Mitsubishi Colt (2004-2012 / MK 1, Z30) Today we will discover the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Mitsubishi Colt. First, …
How to Replace the Headlight Bulb on a Mitsubishi Colt
How to Replace the Headlight Bulb on a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) To replace the headlight bulb on a Mitsubishi Colt, access the inner wheel arch corresponding to the headlight that contains the bulb to be replaced.…
How to Replace the Front Headlight Bulb on the Mitsubishi Colt
How to Replace the Front Headlight Bulb on the Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) In this mini guide for Mitsubishi Colt owners, learn the steps to correctly replace the front headlight bulb. First, park the car on a flat surface a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos