Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Suspension Wishbone

Model: Mitsubishi Outlander MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Suspension system

See other generations:
Video tutorial

The failure of the support bushes (silent blocks) of the suspension wishbones is quite common, especially in SUVs, where the vehicle weight is particularly significant: in this case, consider purchasing a wishbone repair kit or the entire replacement part; in any case, you must disassemble the suspension; lift the vehicle on a hydraulic lift and remove the front wheel; disconnect the anti-roll bar from the wishbone end; then proceed to remove the end connected to the hub support and the fixing pins of the two supports; then attach the anti-roll bar end to the new wishbone and reverse the process for installation.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacing the Anti-Roll Bar Joint
Replacing the Anti-Roll Bar Joint
Mitsubishi Outlander (2007-2012 / MK 2) The anti-roll bar has a ball joint at the end that connects to the suspension arm; specifically, the end of the bar has a loop in which the joint pin…
How to Replace the Driveshaft on Mitsubishi Outlander MK1
How to Replace the Driveshaft on Mitsubishi Outlander MK1
Mitsubishi Outlander (2001-2006 / MK 1) In this video, follow the main instructions to remove and replace the front driveshaft on a first-generation Mitsubishi Outlander. First, lift the ve…
Replacing the Driveshaft Boot on a Mitsubishi Outlander MK2
Mitsubishi Outlander (2007-2012 / MK 2) In today's video, you will see how to remove and replace the front driveshaft boot on a second-generation Mitsubishi Outlander. First, lift the vehic…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos