Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Anti-Roll Bar Joint

Model: Mitsubishi Outlander MK 2 - Years 2007-2012
Part: Anti-roll bar

The anti-roll bar has a ball joint at the end that connects to the suspension arm; specifically, the end of the bar has a loop in which the joint pin is inserted, which is then fixed to the suspension arm via the ball joint pin; unscrew the fixing nut of the joint at the end of the bar and then the one fixing it to the suspension arm; remove the old joint and insert the new one, tightening the respective fixing nuts carefully.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mitsubishi Outlander (2007-2012 / MK 2) The failure of the support bushes (silent blocks) of the suspension wishbones is quite common, especially in SUVs, where the vehicle weight is partic…
Mitsubishi Outlander (2007-2012 / MK 2) It can happen, especially in larger vehicles such as SUVs, that the ball joints at the ends of the steering rack tie rods may fail, becoming loose an…
Mitsubishi Outlander (2021-2026 / MK 4) To correctly replace the battery of your 2022 Mitsubishi Outlander remote control, simply follow the brief and simple procedure described below. Firs…

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos