Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Tank from a Mitsubishi L200?

Model: Mitsubishi Outlander MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the fuel tank from a Mitsubishi L200, lift the vehicle to access the screws securing the tank from the lower rear of the vehicle. Once these screws are loosened, detach the hoses connected to the tank that allow fuel passage.

You must also disconnect the connectors linked to the pump before fully removing the tank; once it is freed, insert the new replacement part and check that everything functions correctly.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan on a Mitsubishi Outlander?
How to Replace the Cabin Fan on a Mitsubishi Outlander?
Mitsubishi Outlander (2007-2012 / MK 2) To replace the heating fan on the Mitsubishi Outlander, open the glove compartment on the passenger side and remove the two side clips so that the co…
How to Remove the Radio from the Mitsubishi Outlander
How to Remove the Radio from the Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) In this video, see how to remove a radio unit from a Mitsubishi Outlander: you will need a cross screwdriver and a plastic spatula to help remove the…
How to Replace the Battery in a Mitsubishi Outlander
How to Replace the Battery in a Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) To replace the battery in a Mitsubishi Outlander, loosen the screws securing the panel at the base of the boot to remove it and gain access to the un…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos