Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the 2016 Nissan Note

Model: Nissan Note MK 2, E12 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tail light bulb

See other generations:
Video tutorial

The replacement of the rear headlight bulb of the 2016 Nissan Note follows simple and quick steps to be performed independently. The first step is to open the trunk and, using a 10mm key, remove the screws along the side bar of the headlight.

The second step is to remove the headlight and disconnect the central connector. The third step is to disconnect the connectors from the bulbs to remove and replace them.

The fourth step is to connect the connector, mount the headlight, and screw in the screws. After completing the steps, we can close the trunk and test the operation of the bulbs.


Posted on 23 December 2024 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Nissan Note
How to replace the rear headlight bulb of the Nissan Note
Nissan Note (2004-2013 / E11, MK 1) Today we will explain how to replace the rear headlight bulb of the Nissan Note produced from 2004 to 2013. To replace the bulb, we need to open the …
How to replace the front headlight bulb of the Nissan Note E11
How to replace the front headlight bulb of the Nissan Note E11
Nissan Note (2004-2013 / E11, MK 1) In the following guide, we will discover together the steps that you need to follow to complete the replacement of the front headlight bulb of your N…
How to Replace the Rear Bulbs on Nissan Note
How to Replace the Rear Bulbs on Nissan Note
Nissan Note (2004-2013 / E11, MK 1) Are the rear light bulbs damaged? How do we change them? Here’s how to disassemble on the Nissan Note. Open the boot lid, and unscrew the securing sc…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos