Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

Follow these steps to replace the battery in the key fob of a Nissan Qashqai: take your key fob and use a screwdriver to pry apart the two covers (split the covers as shown in the video). Pry until the covers separate, then, use a small screwdriver to remove the worn battery.

Get a new battery of the same size and voltage. Remove the small battery from the cover and replace it with the new one, press the key case until you hear it click into place.

Finally, reassemble the two covers and check the proper functioning of the remote by pressing the buttons.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Nissan Qashqai
How to Replace the Key Battery of a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Start by pressing and holding the button located on the back of the key fob of your Nissan Qashqai, then extract the physical emergency key. Next, us…
How to Replace the Key Battery in a Nissan Qashqai
How to Replace the Key Battery in a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) To replace the battery in the Nissan Qashqai key, follow this procedure: First, open the key as if inserting it into the ignition using the button. O…
How to Replace the Key Battery on a Nissan Qashqai J10
How to Replace the Key Battery on a Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) To replace the key battery on a Nissan Qashqai J10, locate the tiny screw on the bottom of the key and open it to access the battery. You will need a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos