Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs of the Nissan Primera 1.8L

Model: Nissan Primera MK 3 - Years 2002-2008
Part: Spark plugs

Today we will see the main instructions that will allow us to disassemble and replace the spark plugs of the Nissan Primera 1.8L engine. First of all, we open the hood of the car and start disconnecting the electrical connectors of the spark plug coils; then we unscrew the screws at the base of the coils using a star wrench or a socket wrench, as shown in the video. At this point, we unscrew the spark plugs one by one to remove them and replace them with new ones, of the right type and with the same pitch; we screw the new spark plugs by hand and then tighten them with a wrench, finally fixing the coils!

Posted on 22 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Check and Replace Spark Plugs
How to Check and Replace Spark Plugs
Nissan Primera (2002-2008 / MK 3) This tutorial shows and explains how to replace the spark plugs on a Nissan Primera. Using a 10 mm hex socket, unscrew the bolt securing the coil. Pr…
How to replace the air filter of the Nissan Primera
How to replace the air filter of the Nissan Primera
Nissan Primera (2002-2008 / MK 3) These short and simple steps will show us how to disassemble and replace the air filter of the Nissan Primera engine. First, we open the hood of the …
How to Reset the Immobiliser on a Nissan Primera
How to Reset the Immobiliser on a Nissan Primera
Nissan Primera (2002-2008 / MK 3) Today, I will explain how to reset the immobiliser control unit on a 2002 Nissan Primera. To perform this operation, we need to remove the lower part…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos