Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the car radio of the Nissan Qashqai and X-Trail

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Car stereo

See other generations:
Video tutorial

In this video, we see how to disassemble and reassemble the radio of the Nissan Qasqhai J11 or X-Trail: we will need to remove the plastic gasket located on the right side of the dashboard, using a plastic lever, and then the partition located on the left (and therefore on the right side of the ignition key). This will allow us to remove the lower part, where the air conditioning controls are located.

In this way, we will have exposed the fixing screws, which we can unscrew, and which will allow us, once removed, to slide the radio out of its housing.

At that point, we just need to disconnect the electrical connectors and the operation is complete.


Posted on 28 May 2025 by ScegliAuto


Related tutorials

Nissan Qashqai (2006-2014 / J10) To remove the radio from the dashboard of a Nissan Qashqai J10, it is advisable to disconnect the negative battery cable: use a plastic lever to deta…
Nissan Qashqai (2006-2014 / J10) To reset the Nissan Qashqai car radio, you need to press and hold the power button of the device, located in the top right corner, while the instrume…
Nissan Qashqai (2006-2014 / J10) The following video tutorial shows us the steps to adjust the sound of the car radio in a Nissan vehicle. To adjust the audio settings on the Nissan …

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - How to fix DAB radio problems on Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Why is the radio of the Nissan Qashqai not working? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos