Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the position light bulb on the Nissan e-NV200

Model: Nissan Nv200 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Light bulb

Video tutorial

In this video, we see how to change the daytime running lights bulbs of a Nissan e-NV200 van. To get a better view, the YouTuber lifted the van, but this is a job that can also be done on the ground. We need to remove the three Philips screws under the plastic bumper, and move away the lower protection - it will also be necessary to loosen the wheel arch - so that we can reach inside with our hands, to get to the lamp.

Illuminating the inside, we clearly see the cable that leads to the lamp. We disconnect it and remove the lamp holder with its bulb; we can also decide to replace the halogen bulb with an approved LED one. After that, it will be sufficient to close everything in the opposite sequence to how we opened it.


Posted on 11 June 2025 by ScegliAuto


Related tutorials

Replacing the Position Bulb of the Front Headlamp on a Nissan NV200
Replacing the Position Bulb of the Front Headlamp on a Nissan NV200
Nissan Nv200 (2009-2024 / MK 1) .. other bulbs in the optical group of the Nissan NV200. First, open the bonnet and start rotating the connector of the position bulb to remove it; along.. …
How to Replace the Front Headlight Bulb in a Nissan NV200?
How to Replace the Front Headlight Bulb in a Nissan NV200?
Nissan Nv200 (2009-2024 / MK 1) .. To replace the front headlight bulb in a Nissan NV200, first turn off the engine and open the bonnet. Locate the affected headlight and remove the rear.. …
How to change the language on a Nissan NV200 screen
How to change the language on a Nissan NV200 screen
Nissan Nv200 (2009-2024 / MK 1) .. change the language on the screen of your Nissan NV200: first, get into the driver's seat and insert the key, which should be in the second position... …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos