Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the AdBlue warning on the Nissan Qashqai

Model: Nissan Qashqai J12 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: AdBlue warning light

See other generations:
Video tutorial

Let's see how to reset the AdBlue warning on the Nissan Qashqai: in fact, after filling the tank, sometimes the system needs a procedure to recognize the new level and reset the alarm. After filling the tank (never up to the extreme limit) with high-quality AdBlue, close the cap, get in the car, turn on the ignition and wait for a minute, a minute and a half.

Then turn off the car completely and wait another couple of minutes. Start the engine normally and drive for 5/15 minutes at a constant speed: this allows the ECU to record the new level and reset the alarm.

Only if necessary, it may be necessary to disconnect the negative terminal of the battery for fifteen minutes, and then idle the engine for another 15 minutes. If the warning still does not disappear, it means there is a problem with the level sensor, or with the pump or injector.


Posted on 28 August 2025 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) Below we will see the instructions that will allow us to reset the AdBlue warning light of the Nissan Qashqai. In order to reset the AdBlue refill wa…
Nissan Qashqai (2014-2022 / J11) To reset the service in your Nissan Qashqai, follow our guide. First, get in the car and turn on the ignition by turning the key to position 1 or pre…
Nissan Qashqai (2014-2022 / J11) Hello everyone! Today we will explain how to reset the important AdBlue additive warning light on your Nissan Qashqai. Reset through the dashboard me…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - How to reset the AdBlue light in the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - How much AdBlue does the Nissan Qashqai contain? Read answer
    • Qashqai 2014-2022 - How many km can a Nissan Qashqai travel with a full tank of AdBlue? Read answer
    • Qashqai 2014-2022 - What causes the AdBlue malfunction on the Nissan Qashqai? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos