Do it yourself
Frequently asked questions about cars and motorcycles

How to restore the service light of the Nissan Np300

Model: Nissan Np300 D23 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

In this article, we will see how to reset the maintenance light of the Nissan Np300. It is recommended to perform this procedure only after having the vehicle serviced. First, start the instrument panel, then press the appropriate navigation button located on the left side of the steering wheel as shown in the video tutorial below this article, navigate to the settings, once the settings are found, navigate with the arrow button located just above the menu button as shown in the video, navigate to the maintenance section, confirm by pressing the ok button, then select the oil section and press the ENTER button to confirm the reset, once the reset is done, go back using the appropriate button and then reset the filter and maintenance sections by selecting them, then selecting reset and confirm, once the reset is complete, go back using the appropriate button.


Posted on 16 October 2025 by ScegliAuto


Related tutorials

Nissan Np300 (1997-2022 / D22) In order to reset the Service light of the Nissan NP300, you need to insert the ignition key into the corresponding slot, so that you can turn on the…
Nissan Np300 (1997-2022 / D22) In this video, see how to reset the service light on a Nissan NP300: enter the vehicle and close the doors, then activate the instrument panel withou…
Nissan Np300 (1997-2022 / D22) If the cigarette lighter stops working suddenly or if there is a fault, the cause is likely a blown fuse. Replacing a blown fuse is straightforward; …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos