Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the electric motor of the steering column of the Nissan Micra.

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

See other generations:
Video tutorial

In this guide, we will go over the main instructions on how to disassemble and replace the electric motor of the steering column of the Nissan Micra. First, let's get inside the vehicle and start by removing the steering wheel and its airbag by disconnecting the electrical connector and unscrewing the central screw; after that, we will remove the steering angle sensor, then disconnect the wiring of the column and the electric motor, as shown in the video.

At this point, we will perform the repair or replacement of the component, finally reassembling the steering wheel and its airbag.


Posted on 15 December 2025 by ScegliAuto


Related tutorials

Guide to disassembling the electric power steering column of the Nissan Micra
Guide to disassembling the electric power steering column of the Nissan Micra
Nissan Micra (2002-2010 / K12) In this guide, we will see the main instructions on how to disassemble and replace the electric power steering column of the Nissan Micra. First, let…
How to Program the Key of a Nissan Micra?
How to Program the Key of a Nissan Micra?
Nissan Micra (2002-2010 / K12) To program the key of a Nissan Micra, insert the key into the ignition barrel: once the key is inserted, you can connect a diagnostic tool to the veh…
How to Replace the Steering Wheel on a Nissan Micra?
How to Replace the Steering Wheel on a Nissan Micra?
Nissan Micra (2002-2010 / K12) To replace the steering wheel on a Nissan Micra, you need to unscrew the two screws located at the back of the steering wheel that hold the airbag in…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos