Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Oil Filter on a Nissan Terrano

Model: Nissan Terrano Terrano 2, MK 2 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Oil filter

See other generations:
Video tutorial

Removing the oil filter on a Nissan Terrano, let's see how to proceed. Open the car's bonnet by pulling up the lever located at the bottom left of the dashboard, and lift the front bonnet, securing it. Using a strap wrench, unscrew the large oil filter.

Lift the car on a jack and unscrew the bolt from the oil sump; allow the fluid to drain into a disposal container. Fit the new oil filter and screw the closure bolt of the oil sump back in. Finally, top up with new oil and close the front bonnet.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on the Nissan Terrano
How to Replace the Engine Oil and Oil Filter on the Nissan Terrano
Nissan Terrano (1993-2005 / Terrano 2, MK 2) Below are the instructions that will allow you to perform routine maintenance by replacing the engine oil and oil filter on the Nissan Terrano. First…
Guide to Replacing the Diesel Injection Pump on the Nissan Terrano
Guide to Replacing the Diesel Injection Pump on the Nissan Terrano
Nissan Terrano (1993-2005 / Terrano 2, MK 2) In this guide, follow the steps for removing and replacing the diesel injection pump on the Nissan Terrano. First, open the bonnet of your car and st…
How to replace the air filter on the Nissan Terrano 2
How to replace the air filter on the Nissan Terrano 2
Nissan Terrano (1993-2005 / Terrano 2, MK 2) If the air filter fitted in your Nissan Terrano 2 is too old and worn, it is time to replace it with a new one. In this mini guide, we will discover …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos