Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement on Nissan Micra 2

Model: Nissan Micra K12 - Years 2002-2010
Part: Engine oil

In this video tutorial, you will learn how to replace the engine oil and oil filter on a second-generation Nissan Micra. First, open the bonnet and remove the oil filler cap to allow the oil to drain more quickly. Then, lift the vehicle and loosen the oil filter with a spanner before unscrewing it by hand. Screw on the new filter. Remove the oil drain plug by unscrewing it and let the oil drain completely. Once done, replace the plug and add oil until the necessary level is reached! Remember to use high-quality oil!

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Engine Oil and Filter on a Nissan Micra K12
How to Replace Engine Oil and Filter on a Nissan Micra K12
Nissan Micra (2002-2010 / K12) Let's see how to replace the oil and filter on a Nissan Micra K12: run the engine for a couple of minutes, block the rear wheels, and lift the front …
How to Replace the Oil Filter and Engine Oil in the Nissan Micra
How to Replace the Oil Filter and Engine Oil in the Nissan Micra
Nissan Micra (2002-2010 / K12) In this video tutorial, you will see how to replace the oil filter and top up the engine oil in the Nissan Micra, following a few simple steps: first…
How to service the Nissan Micra?
How to service the Nissan Micra?
Nissan Micra (1992-2002 / K11) Follow the instructions from the YouTuber to perform a DIY service on your Nissan Micra K11. Start by draining the old oil from the system. Position …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos