Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : Remove the roof on a Nissan Navara

Nissan Navara - Video tutorial

Model: Nissan Navara D40 - Years 2005-2015
Part: Checks and maintenance
Operation: Remove the roof on a Nissan Navara

Remove the roof panel on a Navara? Operation not too difficult, let's see. We remove the side handles of the sky with a screwdriver, disassemble the sun visors of the car. We unscrew and remove the plastics from the ceiling lights and the ceiling light. To remove the panel we need to remove the side cover plastics (where the frame uprights are). We detach the fixing clips of the panel, remove the piece from under the car roof. Be careful when taking it out of the car as it could break. We mount a new panel under the car roof: we fix the ceiling lights, screws and all the other pieces.


Posted on 20 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Navara 2014-2023 - Where is the fuel tank of the Nissan Navara located? Read Answer
    • Navara 2014-2023 - What are the problems with the AdBlue of the Nissan Navara? Read Answer
    • Navara 2014-2023 - What are the problems with the AdBlue on the Nissan Navara NP300? Read Answer
    • Navara 2005-2015 - What problems have affected the Nissan Navara? Read Answer
    • Navara 2014-2023 - What are the warning lights on the Nissan Navara? Read Answer
    • Navara 2014-2023 - How much does it cost to replace the courtesy light switches in the Nissan Navarra? Read Answer
    • Navara 2005-2015 - How do I reset the Nissan Navara Service light? Read Answer
    • Navara 2005-2015 - Where is the jack of a Nissan Navara located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos