Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair a Nissan Navara Handle

Model: Nissan Navara D40 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Handle

See other generations:
Video tutorial

The failure of the cable attachment eyelet on the internal opening lever is a common defect in various Nissan models; while the solution would be to replace the handle, it is possible to repair it by reconstructing the eyelet: you need to drill a small hole through which to pass a steel cable (welding wire is recommended) and then close it on itself to create a proper collar; this way, you can keep the head of the cable in place, which acts as a pull.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of a Nissan Navara
How to Remove the Rear Light of a Nissan Navara
Nissan Navara (2005-2015 / D40) Before you begin, open the tailgate of the load area of your Nissan Navara. Start by unscrewing and removing the screws that secure the rear light to…
Removing the Door Panel on a Nissan Navara
Removing the Door Panel on a Nissan Navara
Nissan Navara (2005-2015 / D40) In this video tutorial, learn how to remove the front door panel of a Nissan Navara. First, open the door and use a plastic lever to remove the trian…
How to Open the Door with a Flat Battery on a Nissan Navara
How to Open the Door with a Flat Battery on a Nissan Navara
Nissan Navara (2005-2015 / D40) How to open the door if the remote battery is flat? Here’s how to open the door with the remote key on a Nissan Navara: take your remote and press th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos