Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuse on a Nissan X Trail

Model: Nissan X Trail MK 2, T31 - Years 2007-2014
Part: Fuse box

Replace damaged fuses in your car? Here’s how to remove them from inside the vehicle. Open the driver’s door and the cover next to the steering wheel (on the dashboard), then remove the drawer. Locate the fuse box. Use needle-nose pliers to pull out the damaged fuses from the compartment. Once done, insert the new fuses into the designated slots. Close the fuse inspection box with the cover and refit the drawer. Finally, test the proper functioning of the vehicle by turning on the ignition. Check the operation of all electrical components.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Nissan X Trail?
Where is the fuse box located in the Nissan X Trail?
Nissan X Trail (2001-2006 / MK 1, T30) The Nissan X Trail model T30, produced from 2001 to 2006, has a fuse box inside. The fuse box is located inside the cabin, specifically behind the dr…
Where is the fuse box located in the 2016 Nissan X-Trail?
Nissan X Trail (2014-2023 / T32, MK 3) In the 2016 Nissan X-Trail, there are two main fuse boxes and two auxiliary ones. One of these is located inside the cabin, beneath the dashboard, wh…
Fuse Diagram and Location for the Nissan X-Trail
Fuse Diagram and Location for the Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) In today's video, we will guide you to locate the fuse boxes and the diagram for the Nissan X-Trail, following the instructions below. First, find th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos