Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Timing Belt from a Nissan Note

Model: Nissan Note E11, MK 1 - Years 2004-2013
Part: Timing belt

Remove the front bonnet. Take off the front wheel to access the timing belts. Remove the splash guard plastics, loosen the tensioner pulley, and slide the belt out of its seat. Using a socket wrench, undo the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Secure the belt cover and the splash guard. Close the front bonnet after maintenance.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Air Conditioning Fan Resistor on the Nissan Note E11
Replacing the Air Conditioning Fan Resistor on the Nissan Note E11
Nissan Note (2004-2013 / E11, MK 1) In today's tutorial video, we will go through the steps to remove and replace the air conditioning fan resistor on the Nissan Note E11. First, get in…
How to remove the gear knob of the Nissan Note
How to remove the gear knob of the Nissan Note
Nissan Note (2004-2013 / E11, MK 1) To quickly and safely remove the gear knob located inside the cabin of your first-generation Nissan Note, you need to follow all the steps described …
How to Replace the Diesel Filter on a Nissan Note
How to Replace the Diesel Filter on a Nissan Note
Nissan Note (2004-2013 / E11, MK 1) Before starting, open the bonnet of your Nissan Note. Begin by unclipping and removing the rear cover of the fire wall. This will give you access to …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos