Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Note
    4. : Nissan Note serpentine belt replacement

Nissan Note - Video tutorial

Model: Nissan Note MK 1, E11 - Years 2004-2013
Part: V-belt
Operation: Nissan Note serpentine belt replacement

Today we will see, in this video tutorial, how to remove and replace the serpentine or alternator belt of the Nissan Note. First we lift the car and start by removing the right front wheel; after which we remove the front wheel arch and the plastic bulkhead that we find under the engine, unscrewing all the fixing screws and removing the plastic clips, as shown in the video. Now we use a socket or star wrench to loosen our belt tensioner; then we remove the belt and replace it with the new one, inserting it correctly between the pulleys!


Posted on 2 May 2024 by ScegliAuto



Remove the Nissan Note timing belt
Nissan Note (2004-2013 / MK 1, E11) Let's see the disassembly of the timing belt of a Nissan Note. We lift the front hood, remove the front wheel to access the timing belts. Disassemble
What is the fuse diagram for the Nissan Note?
Nissan Note (2004-2013 / MK 1, E11) If a device in our Nissan Note suddenly stops working, we can first check the status of the respective fuses whose diagrams are indicated in this vid
How to reset the service light on a 2011 Nissan Note
Nissan Note (2004-2013 / MK 1, E11) To carry out the manual reset of the service light of your 2011 Nissan Note, all you have to do is follow the steps described in our new guide. First

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos