Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Dashboard of the Instrument Cluster on a Nissan Pathfinder

Model: Nissan Pathfinder MK 3, R51 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Instrument cluster

See other generations:
Video tutorial

On the front pillar on the driver's side, there is a handle that you need to remove: to do this, take off the cover clips and unscrew the underlying 10 mm bolts. Disconnect the seal between the door and the pillar, then remove the pillar cover using a plastic lever.

Unscrew the screws securing the dashboard under the steering wheel, remove it, and then unscrew the screws that were hidden by that cover. At this point, you can manually remove the speedometer frame and the entire upper dashboard above the steering wheel.

Finally, unscrew the side screws that secure the instrument cluster and speedometer, and you're done.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to reset the service reminder on the Nissan Pathfinder
How to reset the service reminder on the Nissan Pathfinder
Nissan Pathfinder (2005-2012 / MK 3, R51) Today we will discover the instructions that will allow us to reset the maintenance service reminder for the oil change of the Nissan Pathfinder. Fir…
Where are the fuses located in the Nissan Pathfinder?
Where are the fuses located in the Nissan Pathfinder?
Nissan Pathfinder (2012-2020 / MK 4, R52) The fuse boxes of the Nissan Pathfinder are responsible for containing the fuses that regulate the operation of the devices installed on the vehicle:…
Replacement of the steering wheel control buttons for the Nissan Pathfinder.
Replacement of the steering wheel control buttons for the Nissan Pathfinder.
Nissan Pathfinder (2021-2026 / R53) In this guide, we will see the instructions that will allow us to disassemble and replace the steering wheel control buttons of the Nissan Pathfinder…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos