Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Nissan X-Trail tank pump replacement

Model: Nissan X Trail MK 1, T30 - Years 2001-2006
Part: Fuel pump

We see in this video the instructions on how to remove the tank pump on a Nissan X-Trail first series, in simple steps. First we access the rear part of the vehicle, reclining the rear sofa through the fabric strap; after which we remove the liner to access the tank pump, as shown in the video. At this point we remove the pump cover and disconnect the fuel pipe together with the electrical connector; we just have to unscrew the ring nut of the pump, beating with a flat screwdriver and a hammer, and replace it with the new one!

Posted on 18 January 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel pump of the Nissan X-Trail
Replacement of the fuel pump of the Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) .. to disassemble and replace the fuel pump of the Nissan X-Trail. First, we open the rear doors of the vehicle and start removing the rear seat, pulling.. …
Where is the fuse box located in the Nissan X Trail 1?
Where is the fuse box located in the Nissan X Trail 1?
Nissan X Trail (2001-2006 / MK 1, T30) .. The Nissan X Trail model 1 has two fuse boxes inside. The first fuse box is located inside the engine compartment,.. …
How to replace the fuel pump in the Nissan X-Trail?
How to replace the fuel pump in the Nissan X-Trail?
Nissan X Trail (2001-2006 / MK 1, T30) .. we can see how to replace the fuel pump in the Nissan X-Trail, a very simple and fast operation. First of all, make sure the key is not inserted, then.. …

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos