Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Nissan Qashqai key remote control battery replacement

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Battery
Operation: Nissan Qashqai key remote control battery replacement

In this video tutorial we will see how to remove and replace the remote control battery of a Nissan Qashqai second series. First of all we take our remote control in hand and we go to remove the key inside it; then with a flat screwdriver or something pointed we go to pry inside the hole in order to open the remote control in two parts. At this point we access the electronic board and the battery; remove the latter, leveraging it, and replace it with the new one of the right type (in this case a 2032). Insert the new battery and reassemble everything!


Posted on 27 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2014-2022 - What problems does the Nissan Qashqai's Start & Stop have? Read Answer
    • Qashqai 2014-2022 - What does the message "System Error" on the Nissan Qashqai mean? Read Answer
    • Qashqai 2014-2022 - What does chassis control system failure mean on a Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - What to do if the Nissan Qashqai does not start? Read Answer
    • Qashqai 2014-2022 - What to do in case Start and Stop is faulty on Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - How much is the battery for the Nissan Qashqai 1.5 dci? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos