Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Remote Battery of My Nissan Leaf

Model: Nissan Leaf ZE0, MK 1 - Years 2010-2017
Part: Key

If the remote for your Nissan Leaf stops working suddenly and has not been subjected to any particular impacts, it is most likely just a flat battery. To replace the battery, you can certainly go to an authorised centre or a hardware store where they will replace it in a few minutes. However, with a bit of patience and a screwdriver, you can also do it yourself to save some money. You will simply need a screwdriver, a new battery, and a bit of patience. First, remove the key, then as you can see in the video, gently lever with the screwdriver to open the remote in two. At this point, one half will have the circuit board, and the other half will have the battery. Just replace it and reassemble everything.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key battery of the Nissan Leaf
How to replace the key battery of the Nissan Leaf
Nissan Leaf (2010-2017 / ZE0, MK 1) If your Nissan Leaf key has suddenly stopped working and you are wondering how to replace the battery inside, follow the steps described in this new …
How to replace the battery in the Nissan Leaf remote control.
Nissan Leaf (2010-2017 / ZE0, MK 1) If the remote control of your first-generation Nissan Leaf has suddenly stopped working and you want to find out how to replace the battery inside it…
How to Change the Key Battery on a Nissan Leaf
How to Change the Key Battery on a Nissan Leaf
Nissan Leaf (2010-2017 / ZE0, MK 1) To replace the remote key battery on this vehicle, follow these instructions. On the back of the remote, there is a small latch that needs to be open…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos