Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Front Bumper on a Nissan Versa

Model: Nissan Nissan Various
Part: Front bumper

Video tutorial

In this video, you will see how to fit the front bumper on a Nissan Versa. As shown in the video from minute 5:50, insert the bumper starting from the centre; once in position, hold it steady and attach the side; at this point, you can also attach the opposite side.

Once secured in place, ensure that the lower edge overlaps the panel beneath the car. After this, insert the screw that connects the bumper to the rest of the body; it is located in the wheel area, at the height of the headlights, exactly at the intersection of the two pieces.

Now insert the other rivets located in the wheel area.

Once this is done on both sides, insert the screws located under the bumper that connect the piece to the lower panel. Finally, do the same with the 5 screws located on the upper edge.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Remove the Bonnet on a Nissan Versa
How to Remove the Bonnet on a Nissan Versa
Nissan Nissan Various The bonnet of your car is undoubtedly one of the most robust and important components of your Nissan Versa. In addition to having a purely aesthetic …
How to Remove and Clean the Cabin Fan on a Nissan Versa?
How to Remove and Clean the Cabin Fan on a Nissan Versa?
Nissan Nissan Various To remove the cabin fan on a Nissan Versa, go inside the cabin and pull out the glove compartment by removing the securing screws. In the glove compa…
How to Remove the Front Headlamps on a Nissan Xterra?
How to Remove the Front Headlamps on a Nissan Xterra?
Nissan Nissan Various Removing the front headlamps on a Nissan Xterra is an extremely simple and quick operation. First, ensure the key is not inserted for safety. Then, o…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos