Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace Glow Plugs in a Nissan Qashqai

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Glow plugs

In this detailed tutorial, you will see how to replace the glow plugs in a Nissan Qashqai, as well as perform various checks. First, undo the indicated bolt and release the upper hose clip, remove it, and disconnect the various cables on the right. Once done, remove the engine cover by undoing the two bolts with a 10mm spanner. At this point, after disconnecting the power to the glow plugs and applying some penetrating spray, unscrew them using a long 10mm socket. To tighten the replacement, you will need a torque wrench set to 10Nm.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2006-2014 / J10) The following steps will guide you through removing and replacing the glow plugs on a Nissan Qashqai 2.0 DCI. First, open the bonnet of your car and …
Nissan Qashqai (2006-2014 / J10) Today, discover the instructions for removing and replacing the glow plugs in the engine of the Nissan Qashqai 1.5 DCI. First, open the bonnet of you…
Nissan Qashqai (2014-2022 / J11) Do you want to replace the glow plugs in a Qashqai? Here’s how to remove the glow plugs from the Nissan car. Lift the front bonnet to access the comp…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos