Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spiral Contacts on a Nissan Qashqai?

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the spiral contacts on a Nissan Qashqai, rotate the steering wheel left and right, unscrewing the screws at the rear. This will allow you to detach the front airbag by disconnecting its connectors at the bottom.

Once removed, you can take off the retaining nut to completely remove it. The old contacts can now be taken out and replaced with new spare parts; after installation, remount the steering wheel and the corresponding front airbag, securing everything with the appropriate screws.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2006-2014 / J10) Before starting, lift your Nissan Qashqai. Begin by removing the front wheel and the inner wheel arch by unscrewing the relevant bolts and clips. Nex…
Nissan Qashqai (2014-2022 / J11) Before you can start, lift the rear of your Nissan Qashqai. Begin by removing the rear wheel by unscrewing the fixing bolts. Next, unscrew and remove…
Nissan Qashqai (2006-2014 / J10) Before starting, lift the rear of your Nissan Qashqai. Begin by removing the rear wheel, loosening the fixing bolts. Next, unscrew and remove the bol…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - Have there been any issues reported with the 2015 Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2014-2022 - How do you disable Start and Stop in a Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos