Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

To replace the remote key battery of the vehicle, proceed as follows: extract the key, take a small screwdriver and locate a small slot on the opposite side of the key where you need to insert the screwdriver and lever to open the remote. Once the cover is removed, the battery (model CR 2032) will be visible; use a pointed object to pry it out. Take the new battery and place it in the compartment, ensuring the orientation is correct (positive pole facing up). Finally, reposition the remote cover and apply pressure to secure it.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery for a 2021 Nissan Juke
How to Replace the Key Battery for a 2021 Nissan Juke
Nissan Juke (2019-2026 / MK 2) To safely and quickly replace the exhausted battery inside your 2021 Nissan Juke key, follow the procedure outlined in this guide. First, obtain a fl…
How to Replace the Remote Battery in a Nissan Juke
How to Replace the Remote Battery in a Nissan Juke
Nissan Juke (2010-2019 / MK 1) This guide shows how to replace the remote battery in a Nissan Juke. To perform this operation, you need a small flathead screwdriver. After extracti…
How to Replace the Key Battery of the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Below are the few simple steps you need to follow to correctly replace the battery inside your Nissan Juke key. First, you need to have a new CR2025 …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos