Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Nissan Livinia Grand Livinia

Model: Nissan Livinia Grand Livinia MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Air filter

See other generations:
Video tutorial

You can replace the cabin air filter on the vehicle as follows: Access the cabin from the passenger side. Under the dashboard, near the floor on the side of the center tunnel, there is a screw that you need to remove to take off the plastic cover panel.

Under the panel, you will find the filter housing. To open it, you need to remove the plastic cover.

At that point, you can access the compartment containing the filter to remove it and, if necessary, replace it. Finally, reverse the steps to reassemble.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in the Nissan Livinia Grand Livinia
How to Replace the Key Battery in the Nissan Livinia Grand Livinia
Nissan Livinia Grand Livinia (2013-2020 / MK 2) To quickly and safely replace the battery in your Nissan Livinia Grand Livinia Mk2 key, you only need a flathead screwdriver. Let's see how to do it.…
How to Remove the Radio from Nissan Grand Livina
How to Remove the Radio from Nissan Grand Livina
Nissan Livinia Grand Livinia (2013-2020 / MK 2) In this video tutorial, you will see the main steps to remove and replace the stock radio in the Nissan Grand Livina. First, get inside the vehicle a…
How to Change the Oil on a Nissan Grand Livina
How to Change the Oil on a Nissan Grand Livina
Nissan Livinia Grand Livinia (2013-2020 / MK 2) To change the oil on a Nissan Grand Livina comfortably, lift the vehicle - do not rely too much on your jack; if possible, use a wheel as a spacer - …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos