Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Thermostat on the Nissan Qashqai J11

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Thermostat

In this video tutorial, follow the step-by-step instructions to remove and replace the thermostat on the Nissan Qashqai J11. First, drain the coolant by opening the valve located under the engine; then disconnect the various hoses above the thermostat and remove the bolts securing the intake duct to take it off. At this point, disconnect the thermostat hoses by loosening the clips, and unscrew the additional bolts; simply remove it and replace it with the new one, as shown in the video!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Thermostat on a Nissan Qashqai 1.3
How to Replace the Thermostat on a Nissan Qashqai 1.3
Nissan Qashqai (2014-2022 / J11) Below are the main instructions on how to remove and replace the thermostat on a Nissan Qashqai 1.3. First, open the bonnet of the vehicle and begin …
Replacing the Starter Motor on the Nissan Qashqai J11
Replacing the Starter Motor on the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this video, you will see the procedure necessary for removing and replacing the starter motor on the Nissan Qashqai J11, second series. First, ope…
Where is the OBD port of the Nissan Qashqai J11?
Nissan Qashqai (2014-2022 / J11) Below, discover where the OBD port of your Nissan Qashqai J11 (2014-2022) is located. This port allows you to connect any compatible diagnostic tool …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos