Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Filter Change on the Nissan Rogue

Model: Nissan Rogue S35 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine oil

See other generations:
Video tutorial

For the oil and filter service on your Nissan, first use the car jack since you don't have a lift. Once the car is raised, remove the plastic protective cover to access the oil filter.

Pull out the oil dipstick and get the appropriate socket wrench. Find a container to drain the oil, remove the bolt from the oil pan, and drain it. After this, use a wrench or strap to unscrew the oil filter.

At this point, after removing the filter, let it drain, clean the filter seat well, replace the oil pan plug by tightening the bolt without overdoing it, and reinstall the new oil filter, replacing the rubber O-ring. After completing these steps, fill the engine with new oil to the proper level.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a 2020 Nissan Rogue
How to Reset the Oil Light on a 2020 Nissan Rogue
Nissan Rogue (2014-2020 / T32) If the oil change warning light on your 2020 Nissan Rogue stays illuminated on the dashboard despite a recent oil change, don't worry. You can quickl…
How to Reset the Engine Oil Change Light on the Nissan Rogue T32
How to Reset the Engine Oil Change Light on the Nissan Rogue T32
Nissan Rogue (2014-2020 / T32) This guide shows how to reset the engine oil and filter change light on the Nissan Rogue T32. The reset operation must be performed with the engine r…
How to reset the oil light on the 2023 Nissan Rogue
How to reset the oil light on the 2023 Nissan Rogue
Nissan Rogue (2021-2026 / T33) If you want to manually reset the engine oil light of your Nissan Rogue (2023), you must follow all the steps described in our new guide. First, star…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos