Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Altima
    4. : How to replace spark plugs on a Nissan Altima

Nissan Altima - Video tutorial

Model: Nissan Altima L32 - Years 2007-2012
Part: Spark plugs
Operation: How to replace spark plugs on a Nissan Altima

In this video tutorial we are going to see how to replace the spark plugs on a Nissan Altima 2.5 liter petrol engine. This operation is very simple and can be done independently at home. We start by opening the bonnet and removing the three screws that hold the plastic engine cover in place, we can now remove the four ignition coils and have access to the spark plugs. To remove the spark plugs we need a socket wrench long enough to reach and unscrew them. Once the old spark plugs have been extracted we can replace them and reassemble everything following the procedure in reverse.


Posted on 23 November 2022 by ScegliAuto



How do you replace the spark plugs on the Nissan Altima?
Nissan Altima (2002-2006 / L31) In order to replace the spark plugs of the Nissan Altima you have to go and open the hood, so that you can access the components inside the engine co
How do you replace the spark plugs on the Nissan Altima?
Nissan Altima (2002-2006 / L31) In order to replace the spark plugs of the Nissan Altima you have to go and open the hood, so that you can loosen all the bolts that secure the plast
How do I replace the spark plugs on my Nissan Altima?
Nissan Altima (2007-2012 / L32) To go and replace the spark plugs of your Nissan Altima, you must first open the front hood, so that you can loosen all the bolts that hold the plast

Other guides that may interest you

    Frequently Asked Questions

    • Altima 2002-2006 - Why doesn't the engine of the Nissan Altima 2.5L start? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos