Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Differential Fluid on a 2008-2015 Nissan Rogue

Model: Nissan Rogue S35 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Differential

See other generations:
Video tutorial

The video shows how to replace the differential fluid on a 2008-2015 Nissan Rogue with all-wheel drive. Perform this operation when the fluid is warm to make it easier to drain.

Be careful to avoid burns. Block the front wheels to prevent the vehicle from rolling.

Then, lift the rear of the vehicle with a jack. Support the vehicle with jack stands.

After placing a drain pan under the differential, remove the drain plug to let the fluid drain out. Clean and replace the plug using a new sealing washer, and tighten to the specified torque. Using a manual pump syringe, inject the fluid into the differential through the upper plug.

Clean and replace the plug using a new washer, and tighten to the specified torque. Lower the vehicle and perform a check while driving.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Check the Brake Fluid Level on a Nissan Rogue
How to Check the Brake Fluid Level on a Nissan Rogue
Nissan Rogue (2014-2020 / T32) Checking the brake fluid level on a Nissan Rogue (or Qashqai, which is essentially the same vehicle) is very simple, as the fluid reservoir is clearl…
Replacing the Alternator on the Nissan Rogue
Replacing the Alternator on the Nissan Rogue
Nissan Rogue (2008-2015 / S35) Let's briefly go over the instructions to remove and replace the alternator on the Nissan Rogue, as well as the Nissan Qashqai. First, open the hood …
How to disassemble the radio of the 2013 Nissan Rogue
How to disassemble the radio of the 2013 Nissan Rogue
Nissan Rogue (2008-2015 / S35) In this new mini guide dedicated to all of you who own a Nissan Rogue (year 2013), we will help you complete the removal of the factory radio inside …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos