Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Nissan Tiida Versa?

Model: Nissan Tiida Versa C12 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

To remove the radio from the vehicle, follow these steps: Sit in the driver's seat, and using a sharp object, pry up the upper panel of the dashboard above the air vents, taking care not to break the retaining clips. Then, remove the screws located above the air outlet vents.

Pry and pull the stereo trim towards you. Under the trim, you will find four screws securing the radio that need to be removed. At this point, you can extract the radio itself and finally disconnect the connectors located at the back.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Remove the Car Radio in the Nissan Tiida Versa
How to Remove the Car Radio in the Nissan Tiida Versa
Nissan Tiida Versa (2004-2011 / C11) In today's video, you will see how to remove the car radio in the Nissan Tiida Versa. First, gather a flathead screwdriver and a Phillips screwdriver…
How to Remove the Radio from the Nissan Tiida Versa
How to Remove the Radio from the Nissan Tiida Versa
Nissan Tiida Versa (2004-2011 / C11) Today, you will learn how to remove the factory radio from the Nissan Tiida Versa by following the instructions below. First, get inside the vehicle …
How to Remove the Car Radio in the Nissan Tiida?
How to Remove the Car Radio in the Nissan Tiida?
Nissan Tiida Versa (2004-2011 / C11) In this tutorial, you will see how to remove the car radio in the Nissan Tiida, a very simple and quick operation. Before proceeding, make sure the k…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos