Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : How do you replace the rear brake shoes on a Nissan Navara?

Nissan Navara - Video tutorial

Model: Nissan Navara D40 - Years 2005-2015
Part: Drums and shoes
Operation: How do you replace the rear brake shoes on a Nissan Navara?

In order to replace the rear brake shoes on the Nissan Navara, the car must be lifted so that the corresponding wheel is not in contact with the floor: the latter must then be removed from its seat by loosening the bolts and detaching the drum placed in its underlying part. Once the drum has been removed, you can proceed by removing the hooks that fix the jaws to the actuator, so that they are released and can thus be replaced. The new shoes will then have to be suitably positioned and fixed, reassembling the drum and the corresponding wheel.


Posted on 11 April 2023 by ScegliAuto



Removal of rear drum Nissan Navara
Nissan Navara (2005-2015 / D40) In this video tutorial we will see how to remove the rear drum of a Nissan Navara. To do this we will also lift the car from the rear only, in order
How to remove the taillight of a Nissan Navara
Nissan Navara (2005-2015 / D40) Before we can begin, we will have to go to open the tailgate of the load compartment of our Nissan Navara. So let's start by unscrewing and removing
Where is the OBD port located on the Nissan Navara 2?
Nissan Navara (2005-2015 / D40) If you own a Nissan Navara Mk2 (year 2005-2015) and want to find out where the OBD port is located, all you have to do is follow these steps. First,

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos